All of your connected drives are displayed. Next, type list disk, and press Enter. Change security permissions in flash drive properties If using diskpart, as detailed in the section above, does not work to clear the read-only attribute of a USB flash drive, the security permissions may need to be changed.
Connect your USB drive again and, with a bit of luck, you should find it is no longer write protected. If this is the situation, then simply move the switch to the unlocked position and try to copy files again.
To fix the problem, you have to use Registry Editor to delete the corrupted registry entries. At this point, I would advise performing a full system scan after updating your virus definitions. Mine is Disk 4. The only solution in this case is to buy a new drive.
The only thing left to do is stick the files onto a USB flash drive. This causes an entirely different error message, but it can be off-putting, nonetheless. Depending on your antivirus software, you may be able to configure it to automatically scan a USB drive when first plugged in.
You should see a list of currently mounted disks, like so 2. Double-click on the WriteProtect value in the right-hand pane. Now, at the prompt, type the following and press Enter after each command: Open start menu, in the search bar type regedit and press enter.
If you do find a virus, eliminate it using your antivirus software. Click the OK button on the Permissions and Properties window to save the security permissions change. Type attributes disk clear readonly and press Enter. Right-click it in File Explorer and select Properties. Browse to your USB drive, and locate the offending file.Jan 26, · how do I unwrite-protect my flash drive I did not intend this drive to be write protected.
Now I cannot edit the only folder on it. This thread is locked. My usb flash suddenly decided it is "write protected". How do I reverse this so I. of results for "write protect usb drive" Netac Physical Write Protect Switch USB Flash Drive - 64GB US USB Hardware Lock.
USB Flash Drive is write protected - How do I remove it?
If you are sure that there is no write-protect switch. You can try low-level format it. If you’ve got a USB drive or SD card that can’t be formatted and to which you can’t copy files, then take a look at our guide to removing write protection.
Ways to enable and disable write-protection for a USB flash drive, including a write-protect switch, file properties and flash drive security.Download